Reverse Osmosis Drinking Water System

 Reverse Osmosis is the method of purifying liquid by pushing it through a semi-permeable membrane. The membrane allows pure water molecules through it, whilst impurities are flushed away. The R.O. membrane removes suspended solids, up to 98% of all dissolved solids, and virtually all bacteria, pesticides, insecticides and viruses.

 

The system can be installed DIY or by your plumber and needs to be hooked up to a drain. The filters should be replaced every 6 months and the membrane every 2-3 years. The unit measures 38x33x13cm. The tank is 20cm in diameter and 46cm high. Both parts should fit under an average sink (please check dimensions). A separate tap is provided to be fitted to the corner of your kitchen sink.
 

 

How it works:
Incoming water is filtered through a four stage filter system.
Stage 1. A 5 micron pre-filter removes any sediment and particles.
Stage 2. An activated carbon block filter removes a large number of heavy metals and chlorine.
Stage 3. The water is forced through the membrane for removal of pesticides, bacteria, nitrates and the remaining metals. The water is then stored in a pressure tank with a butyl liner.
Stage 4. When the tap is turned on the butyl liner contracts and the water is pushed out through a final granulated carbon filter to remove any residual taste from the liner and then out through the tap.

Filter reminder service
It is important to change the filter candles in your water filter system on a regular basis. We will automatically put your name onto our filter reminder service so that you can keep your water filter functioning effectively. We offer this service for the drinking water systems, the wholehouse systems, the shower filters and the bath dechlorinator.